ProComm is your source for America’s premier voice talent.

Call Toll Free 866.438.6423

Microphone Technique for Voice Over Talent

by Dan Friedman on December 1, 2009

The ability to use proper microphone technique to bring out the best in your voice is indicative of a true voice over professional. Learning and utilizing proper microphone technique is incredibly helpful when it comes to editing, mixing and producing great voice overs. For a voice talent, knowing how to: avoid plosives, adjust for dynamics, and “work” the microphone so that it will enhance the emotion of the delivery are essential skills. Expertly applying these skills helps a recorded voice track fit into a mix almost effortlessly.

General Mic Positioning

Your proximity to the microphone, how near or far you are to it, affects the microphone’s frequency response. Your axis to the microphone – how centered or off center you are to the diaphragm – affects frequency response as well as how well the microphone captures your voice depending on its polar pattern. Naturally the dynamics of your delivery affect the microphone as well.

Note: “Frequency response” refers to the lows and highs in the tone of your voice (like bass and treble on a stereo) and “Polar pattern” refers to the space around the microphone’s diaphragm that picks up sound. A microphone for voice over typically (although some are adjustable) utilizes a cardioid polar pattern. Imagine a space the size and shape of a large pumpkin around the grill of the microphone: this is a cardioid pattern. “Dynamics” refers to how loud or soft your voice gets while reading a script.

Each microphone, no matter what type you are using, has a sweet spot. This is the place in proximity to the sound source where the microphone generally sounds its best. In large diaphragm condenser microphones the sweet spot is generally about 6 to 8 inches away from the diaphragm (fig. 1). This is often where your voice will sound its most natural relative to the ability of the microphone to reproduce that sound accurately.

(fig. 1)

figure 1: voice over microphone positioning

When using a large diaphragm condenser, position yourself about 6-8 inches away from the microphone with the diaphragm slightly off center (left or right, whichever feels comfortable – fig. 3) and above your mouth (fig. 2). If your voice sounds too “nasally” try moving the microphone lower or higher. Tilt the microphone slightly backwards so that the air coming from the mouth and nose doesn’t hit the microphone’s diaphragm directly, but at an angle. Tilting the angle of the microphone helps to diffuse the impact of the air which helps to avoid plosives. This initial position will work for more common voice overs such as straight-forward announcer, narration, and promotional reads.

(fig .2)figure 2: general mic positioning

(fig. 3)

figure 3: general mic positioning

Getting Creative

For more creative script scenarios, treat the microphone as you would someone’s ear. For a voice over that is intimate, don’t be afraid to move in closer. Getting closer to the microphone will enhance the lower and higher frequencies of your voice, which is perfect for whispery, breathy, romantic or seductive reads. For reads that require projection, such as a shouting car spot or a voice over where you are supposed to sound as though you are calling out from another room, it is best to turn away or increase the distance between you and the microphone. In this type of scenario, creating physical distance during recording makes the scene sound more natural when mixing. In some situations, you can even move to the back side of the microphone.

Avoiding Plosives

One basic but very important element to good microphone technique is being able to restrain plosives. Hard consonants such as “t” and “p” can cause the diaphragm of the microphone to “pop”. At worst, this “pop” can potentially damage the microphone and at best it is a guarantee that another take will have to be done. Plosives can also occur at the ends of words where a consonant requires an expulsion of air such as with “f”. Tilting the microphone backwards, as previously described, can help but there are also several other techniques and tools for avoiding plosives such as: skewing your mouth or head away from the microphone, understating the consonant, using a “pop filter” (fig. 4) and/or using a “wind sock”. Be aware that when using a wind sock (this is a foam cover that goes over the head of the microphone), the sound of the microphone can be somewhat altered. High frequency response and sibilance is often diminished and therefore proper technique in combination with a pop filter is a much better solution.

(fig. 4)Neumann TLM-103 with pop filter

Good technique takes practice. Record yourself reading various types of copy from various distances in proximity to your microphone. By doing this, you will learn how your microphone is affecting your voice under various conditions and how it improves, or impairs, your ability to communicate the intended feeling that goes with the message.

{ 13 comments }

Lisa Rice December 1, 2009 at 5:28 pm

Thanks for the ideas!

PanRight Productions December 3, 2009 at 9:20 pm

Another good “plosive” avoidance technique for the initial letter “P” is to smile when you begin the word; it diffuses the air coming out 🙂

Debra Stamp December 7, 2009 at 10:11 am

No matter how many years I’ve been in the VO business, it always helps to be reminded of the basics. Good solid post – tks.

Janet January 5, 2010 at 1:37 pm

Great techniques! And yes, they do take practice, but it’s always critical to CONTINUE progressing and learning new techniques that set you ahead of the competition.

Tom Kane January 18, 2010 at 1:29 pm

Thanks for the tips. I received your flyer. How can I become a voiceover talent for you? 954-735-6118. Thank you.

Chris Porter January 22, 2010 at 10:31 am

Tom – If you’re interested in joining our roster, the details are right here…
http://procommss.com/contact_talent.php

submit a demo with this link….

http://procommss.com/request_talent.php

Ari R April 9, 2010 at 1:10 pm

Hey, I just found and LOVED this article!! I do professional V/O for my living and found this helpful to say the least.

Thanks!!

George Whittam January 19, 2011 at 10:07 pm

Great post! I am using it right now with a client on the phone to help illustrate how to position her mic. I will post this as a link from my resources section of the website.

George Whittam

Dan Friedman January 20, 2011 at 12:02 pm

Thank you all for your kind words. I have more articles currently available on the ProComm Voices site and will continue to write them (I’ve got a book as well). Thank you again and if there is something you would like me to write about, please let me know. Have a great day!!

Jeff Hirschberg April 16, 2011 at 5:56 pm

I saw some footage of actors recording for the movie Rio recently. I noticed that for some, the mic was angled away from them, as shown above and for others, it was reversed and the bottom of the mic was angled towards the actor. Does this make a difference or is it just two different ways of accomplishing the same thing?

Jeff

Dan Friedman June 11, 2011 at 11:59 am

Jeff,

For movies, the actors will often have two microphones. One primary (closer to them) and one secondary (often a shotgun mic positioned further away). This provides different sounds for the environment that they may be in as well as a backup audio track of the performance. To answer your question; the angle of the microphone as well as its distance to the actor depends on the type of microphone that it is. A shotgun mic is positioned so it points directly toward the actor. They are speaking towards the top of the microphone. Whereas, a large diaphragm condenser (like the one pictured above) appears as though you are talking into the side of the microphone rather than the top. Thanks for reading and for your questions.

Dan

Lesley Lyon British Voice Over May 3, 2012 at 5:38 pm

A great article! Thank you so much for posting. Another trick for the plosives I use is to put my finger about 1 inch in front of my mouth.

Mckenzie Voice January 8, 2013 at 7:38 pm

Always good to read any articles about recording techniques for voice overs. These are very helpful for getting the best sound possible from your voice. Different mics give different results but it is a good starting point for anyone wanting to perfect their art. Fine tune our microphone placement today and we can all check the difference after.

Comments on this entry are closed.

{ 3 trackbacks }

Previous post:

Next post: